Product Line


Zoom +

WEH® Connector TW17P for Whitworth tube thread DIN EN ISO 228-1, G3/4" internal thread, pneumatic actuation, max. 350 bar

Add to Compare
  • Connection in seconds
  • No hand tightening required
  • WEH® Jaw Locking Mechanism
  • Ergonomic design
  • High-grade materials
Description
WEH® Connector TW17P for Whitworth tube thread DIN EN ISO 228-1, G3/4" internal thread, pneumatic actuation, max. 350 bar
The WEH® TW17P Quick Connector for leak testing connects to Whitworth tube thread to DIN EN ISO 228-1.
The higher the test pressure, the tighter the WEH® Connector will clamp itself into the thread of the test piece thus establishing a leak tight connection in just seconds. The front O-ring reliably seals the connection and can be easily replaced at each maintenance.
Additional sealants and sealing tapes are not required.

Time-consuming and expensive clamping and testing devices are eliminated. The TW17P is therefore the ideal tool for frequent connection and disconnection.

Bores have been added as standard to the clamping jaws for increased medium flow.

The WEH® TW17P Connector is equipped with a pneumatic actuation for external manual, semi or fully automatic control systems and available for high pressure up to max. 350 bar.

Special designs such as longer or shorter versions of the connector, versions with hydraulic actuation, plug versions etc. are available on request.
Features
  • Connection in seconds
  • No hand tightening required
  • WEH® Jaw Locking Mechanism
  • Ergonomic design
  • High-grade materials
  • Automation possible
  • Testing devices are eliminated
Technical Data
Max. allowable operating pressure PS 350 bar (5,000 psi)
Pilot pressure 6 - 12 bar ( 90 - 175 psi) compressed air
Temperature range +5 °C up to +80 °C
Connects to G3/4" internal thread
Media inlet G3/4" internal thread
Leak rate 1 x 10-3 mbar x l/s
Actuation P = pneumatic actuation for automated applications and activations
Material Corrosion resistant stainless steel, anodized aluminium
Sealing material Front seal of NBR
Navision No. C1-18220
Application
Quick connect / disconnect for pneumatic and hydraulic pressure testing and function testing of components with internal thread for the following standard sizes:

  • Whitworth tube thread to DIN EN ISO 228-1 | G3/4" internal thread


The TW17P Connector is suitable for testing engine / engine blocks, tanks, pressure vessels, oil coolers, steering racks, filler cap ports, pressure transducers, aggregates, hoses and hydraulic components.
Downloads
Document type Format Size Download
Press release PDF 636 KB
Datasheet PDF 554 KB
Inquiry List

 

You have no items in your inquiry list.

Back to Top