WEH® Quick release nipple TN350 for connector changeover, sliding sleeve actuation, max. 375 bar


When changing over to gas cylinders having different cylinder valves, the filling hose has to be disconnected from the filling connector. The quick release coupling has solved this problem, as each WEH® Connector can use the TK350 Quick Couplingand the corresponding TN350 Quick Coupling Nipple fitted to the filling hose.The quick release system is used for quick changes of WEH® Connectors, either for repair or for a changeover to another type of connector. For example a change from residual pressure to non-residual pressure connectors is easily achieved.No additional swivel joint is necessary with the TK350-TN350.

The quick release system consists of the WEH® Quick Coupling TK350 (without shut-off valve) for direct connection to the WEH® Connectors TW54, TW57 and TW67 and a quick coupling nipple TN350 (without shut-off valve) for connection to the filling hose.The WEH® Coupling TK350 is hand-tightened directly to the WEH® Connector and the TN350 nipple directly to the filling hose. When changing between different cylinder valves merely disconnect coupling and nipple by unlocking the bayonet lock and pulling back the sliding sleeve of the TK350. The TN350 nipple remains mounted to the filling hose and is connected to another WEH® Connector also equipped with the WEH® Quick Relase Coupling TK350. This ensures a quick and easy changeover of filling connectors.

The WEH® Quick Relase Coupling TK350 is equipped with a red indicator ring which is not visible when correctly connected and a bayonet lock for additional safety against accidental disconnection.

Nominal bore (DN)
5 mm
Max. allowable operating pressure PS
375 bar (5,440 psi)
Temperature range
+5 °C up to +80 °C
+5 °C up to +60 °C (O₂)
Inert gases and oxygen
Corrosion resistant
TK350:brass and stainless stell
TN350: stainless steel
Sealing material
Depending on medium
Conformity / Tests / Approvals
Type approval for suitability against adiabatic compression available
Part no.
Marketing Features
Bayonet lock,Can be used as a swivel joint,For 200 and 300 bar applications,High-grade materials,Quick changeover of connectors,Suitable for inert/flammable gases and oxygen

Quick release system for a quick and easy changeover of WEH® Connectors, whether for repair, to another type or a change from residual pressure to non-residual pressure cylinder valves.

Adatlap EN 294 KB
Adatlap DE 294 KB
Az Ön üzenete nekünk
Adatainak tárolása, hogy a kért tartalmat elérhetővé tegyük. Bármikor módosithatja illetve törölheti személyes adatait. További információkért kérjük olvassa el adatvédelmi irányelveinket.
Hogyan lehet elérni termékszakértőinket
+36 1 453 7063