WEH® Connector TW05 for testing of components with female thread, grip sleeve actuation, 5 - 12 bar - Product family

Connects to
Kérem válasszon terméket!

The WEH® TW05 quick connector is the ideal tool for function, pressure and leak testing. Pneumatic components with female thread can thus be tested faster than ever before during series production.

Safe and pressure-tight connections to female threads of the most diverse connection standards can be established in just seconds - without tedious hand tightening.

Connecting and pressurising the test piece with 5 - 12 bar is accomplished in one operation. By simple actuation of the sliding sleeve, the patented WEH® clamping jaws spread apart and grip into the threaded test piece port.Additional sealants are not required. Complex and expensive clamping and testing devices are eliminated.

For automated testing procedures (frequent connections), the TW05 is also available with control housing instead of the sliding sleeve. With this version, actuation is carried out via external control and pressure lines. Thanks to the automated testing procedures, considerable time and cost savings are achieved.

The quick connector pays off within shortest time: Testing times are reduced, workflows improved and productivity is enhanced.

TW05 for sealing female threaded ports (disconnected)

TW05 for sealing female threaded ports (connected)

Max. allowable operating pressure PS
12 bar
Temperature range
+5 °C up to +80 °C
Leak rate
1 x 10-3 mbar x l/s
Manual actuation via grip sleeve
Clamping jaws: Corrosion-resistant stainless steel
Outer parts: Anodized aluminium
Sealing material
Front seal of NBR
Marketing Features
Automation possible,Increased productivity & Cost reductions,Compact design,Connection in seconds,Ergonomic design,High-grade materials,No hand tightening required,Simple seal replacement,WEH® Jaw Locking Mechanism

Quick coupler for pressure testing / function testing / leak testing with compressed air of pneumatic components with female threads for the following standard sizes:

  • Whitworth tube thread to DIN EN ISO 228-1 | G1/8" up to G1/2"
  • NPT thread (ANSI/ASME B1.20.1-1983) | NPT 1/8" up to NPT 1/2"

The TW05 Connector is suitable for testing pneumatic cylinders / mini-cylinders, pneumatic valves, fixtures, air engine, pivot drives, radiators and pneumatic tools. In combination with a control housing it is the ideal tool for automated leak tests.

Adatlap EN 305 KB
Adatlap DE 297 KB
Az Ön üzenete nekünk
Adatainak tárolása, hogy a kért tartalmat elérhetővé tegyük. Bármikor módosithatja illetve törölheti személyes adatait. További információkért kérjük olvassa el adatvédelmi irányelveinket.
Hogyan lehet elérni termékszakértőinket
+36 1 453 7063