WEH® Fueling Nozzle TK1 CNG - Product family

for Slow-Fill of cars (NGV1) 

The TK1 CNG fueling nozzle is designed specifically for time filling of vehicles with ‘Fuelmaker’ compressors and is best suited for this application.

The TK1 CNG is now even easier to operate. The clamping jaws are opened when the nozzle is disconnected and the sliding sleeve need not being pulled back to connect the nozzle. Only push the nozzle straight onto the receptacle. The jaws of the TK1 CNG clamp onto the receptacle. While the fueling nozzle is connected, the shut-off valve in the nozzle will open - the pressure-tight connection is established.

Even difficult-to-access receptacles can easily be refuelled due to the extended construction of the fueling nozzle.

Nominal bore (DN)
4 mm
Pressure range
P30 acc. to ANSI NGV1 / B200 acc. to ISO 14469
PN = 200 bar (3,000 psi) | PS = 300 bar
P36 acc. to ANSI NGV1 / B250 acc. to ISO 14469
PN = 250 bar (3,600 psi) | PS = 350 bar
Temperature range
-40 °C up to +85 °C
Corrosion resistant
Sealing material
Natural gas compatible
With plastic thermal protection
Conformity / Tests / Approvals
The products comply with ANSI NGV1-2006.
Marketing Features
Colour coded sliding sleeve (200 bar / 3 000 psi black | 250 bar / 3 600 psi yellow),Compact design,Compatible with receptacles acc. to NGV1 standard and ISO 14469,High-grade materials,Integrated shut-off valve,Plastic thermal protection,Push-Pull actuation,WEH® Jaw Locking Mechanism

Fueling nozzle for CNG time filling of cars to be used with WEH® Receptacles acc. to NGV1 standard and ISO 14469. Operation only by specially trained service personnel. Not for self-service operation!

Küldjön Üzenetet
Adatainak tárolása, hogy a kért tartalmat elérhetővé tegyük. Bármikor módosithatja illetve törölheti személyes adatait. További információkért kérjük olvassa el adatvédelmi irányelveinket.
Vegye fel velünk a kapcsolatot
+36 1 453 7063