WEH® Fueling Nozzle TK17 H₂ 35 MPa for fast filling of cars, single-handed operation, self-service

C1-174292

WEH® Fueling nozzle for hydrogen fast filling of cars at self-service fueling stations

The WEH® TK17 H₂ 35 MPa has been developed for refueling fuel cell electric cars with compressed hydrogen (CGH₂).

The fueling nozzle with single-handed operation is just as quick and easy to use as the common petrol nozzle and has a similar look and feel. Simply lift the nozzle from the dispenser and place it onto the vehicle‘s receptacle.

250° rotation makes for easy engagement with the vehicle‘s fuel receptacle.

Compress the actuation lever until the locking lever engages and the fueling procedure begins. The hydrogen can only flow through the line if there is a safe connection.

After refueling disengage the nozzle‘s locking lever and disconnect. Please note that refueling may be stopped or paused at any time.
The hand grip has a magnet for actuation of the magnet switch for activation of the dispenser.

The internal coding for pressure range and gas type ensures that the WEH® TK17 H2 35 MPa can be connected to the compatible WEH® Receptacles and also prevents the risk of confusion with natural gas.

Nominal bore (DN)
4 mm
Pressure range
PN = 35 MPa | PS = 49 MPa
Media temperature range
-40 °C up to +85 °C
Ambient temperature range
-40 °C up to +85 °C
Media inlet B1
UNF 7/16"-20 male thread, SAE J514, 37° cone
Material
Corrosion resistant
Sealing material
Hydrogen compatible
Nozzle type
Typ C nach SAE J2600:2015 und vorherige bzw. ISO 17268:2012 und vorherige
Design
With plastic thermal protection, cold protection and hand grip with magnet
Weight
Approx. 1.8 kg (3.97 lbs.)
Conformity / Tests / Approvals
Tests acc. to SAE J2600:2002
Part no.
C1-174292
Marketing Features
Füllkupplung Typ C nach SAE J2600 bzw. ISO 17268,Left or right single-handed operation,Coding for pressure range / gas type,Compatible with the WEH® TN1 H₂ receptacle profile,Einfache Handhabung,High flow rate -> short filling times,Hand grip with magnet,High-grade materials,Plastic thermal protection,WEH ® EASY-TURN swivel joint approx. 250°,WEH® Jaw Locking Mechanism
Alkalmazás

Fueling nozzle for H2 fast filling of electric / hybrid cars with fuell cells (FCV) at self-service fueling stations.

Adatlapok
/Files/Files/05-Data-Sheets/Hydrogen-Fueling-Components/Fueling-Nozzle/tk17-h2-35mpa-data-sheet-en.pdf
Adatlap EN 516 KB
/Files/Files/05-Data-Sheets/Hydrogen-Fueling-Components/Fueling-Nozzle/tk17-h2-35mpa-datenblatt-de.pdf
Adatlap DE 504 KB
 
Az Ön üzenete nekünk
Adatainak tárolása, hogy a kért tartalmat elérhetővé tegyük. Bármikor módosithatja illetve törölheti személyes adatait. További információkért kérjük olvassa el adatvédelmi irányelveinket.
Hogyan lehet elérni termékszakértőinket
Telefon
+36 1 453 7063
Email