WEH® Defueling Nozzle TK6 H₂ with venting valve
C1-104732-X01
for discharging of cars through the filling receptacle
Cars running on hydrogen have to be serviced and checked regularly, a process involving the discharge of their pressurized fuel tanks. The WEH® TK6 H₂ defueling nozzle with venting valve has been designed for this specific purpose.
The defueling nozzle is simply engaged onto the receptacle of the cars and the knurled spindle fully turned until the receptacle is fully open. Discharge can now take place through the lateral media discharge vent.
The defueling nozzle is simply engaged onto the receptacle of the cars and the knurled spindle fully turned until the receptacle is fully open. Discharge can now take place through the lateral media discharge vent.
Nominal bore (DN)
6 mm
Pressure range
PN = 35 MPa | PS = 45 MPa
Media temperature range
-20 °C up to +85 °C
Ambient temperature range
-40 °C up to +85 °C
Material
Corrosion resistant
Sealing material
Hydrogen compatible
Design
With plastic thermal protection, opening spindle and venting valve
Weight
Approx. 1.2 kg (2.65 lbs.)
Part no.
C1-104732-X01
Marketing Features
Discharge through the filling receptacle,Integrated venting valve,Knurled spindle actuation,Only for WEH® Receptacle TN1 H₂ (without filter),Plastic thermal protection
Alkalmazás
Defueling nozzle for discharging hydrogen fuel tanks of cars via filling receptacle, only to be used with WEH® TN1 H2 Receptacles without filter. Operation only by specially trained personnel. Not for self-service operation!
Attention: The TK6 H2 may not be used for filling!
CAD fájlok
