WEH® Connector TW17V for testing of components with female thread, pneumatic actuation via valve button, vacuum up to max. 350 bar - Product family

Please find below a selection of available articles.
For further articles and designs, please refer to our data sheet or catalog.

Connects to
Operating Pressure PS
Kérem válasszon terméket!

WEH® Leak Test Quick Connector TW17V for vacuum and pressure testing up to max. 350 bar


The WEH® TW17V connector is the perfect tool for pressure, function and vacuum testing during production and rated for pressure up to max. 350 bar. The safe and pressure-tight connection to standardised female threads is established in just seconds – without tedious hand tightening.

No additional thread sealants are required, time-consuming and expensive clamping and testing devices are eliminated. The pneumatic actuation is very easy and requires only little effort. Simply press the valve button and place the connector loosely into the test piece. On frequent connection and disconnection considerable time and cost savings are achieved thanks to the automation.

Bores have been added as standard to the clamping jaws for body sizes 5 – 6 of the connector for increased media flow and enhanced productivity.

The quick connector is available for low pressure up to 50 bar and high pressure up to 350 bar. For manual actuation we offer the TW17H with hand lever, for pneumatic applications the TW17P for fully automatic control systems is the right choice.

Special versions such as e.g. longer or shorter versions, plug versions or versions for hydraulic actuation etc. are also possible.

TW17V Test fitting for engines

TW17V for automated leak tests

Max. allowable operating pressure PS
Vacuum up to 350 bar (5,000 psi)
Pilot pressure
6 - 12 bar ( 90 - 175 psi) compressed air
Temperature range
+5 °C up to +80 °C
Leak rate
1 x 10-3 mbar x l/s
Actuation
V = actuation via valve button
Material
Corrosion resistant stainless steel, anodized aluminium
Sealing material
Front seal of NBR
Marketing Features
Automation possible,Increased productivity & Cost reductions,Connection in seconds,Ergonomic design,High-grade materials,No hand tightening required,Testing devices are eliminated,WEH® Jaw Locking Mechanism
Alkalmazás

Quick connect / disconnect for pneumatic and hydraulic pressure testing and function testing of components with female thread for the following standard sizes:

  • Metric ISO thread to DIN 13 | M10x1.0 up to M27x2.0
  • Whitworth tube thread to DIN EN ISO 228-1 | G1/8" up to G1"
  • BSPT (tapered Whitworth tube thread) | BSPT 1/8" up to BSPT 1"
  • NPT thread (ANSI/ASME B1.20.1-1983) | NPT 1/8" up to NPT 1"
  • SAE-O-Ring Boss | UNF 7/16"-20 up to UN 1 5/16"-12

The TW17V Connector is suitable for automated testing engine / engine blocks, tanks, pressure vessels, oil coolers, steering racks, filler cap ports, pressure transducers, aggregates, hoses and hydraulic components and for automated testing systems, automatic production test benchs and robotics.

The WEH TW17V Test Connector is also used in the field of electric mobility, e.g. for leak tests of the cooling circuit and oil modules of electric motors, battery cases and solar batteries.

Adatlapok
/Files/Files/05-Data-Sheets/Quick-Connectors/tw17-data-sheet-en.pdf
Adatlap EN 549 KB
/Files/Files/05-Data-Sheets/Quick-Connectors/tw17-datenblatt-de.pdf
Adatlap DE 548 KB
 
Az Ön üzenete nekünk
Adatainak tárolása, hogy a kért tartalmat elérhetővé tegyük. Bármikor módosithatja illetve törölheti személyes adatait. További információkért kérjük olvassa el adatvédelmi irányelveinket.
Hogyan lehet elérni termékszakértőinket
Telefon
+36 1 453 7063
Email