WEH® Connector TW111 for filling refrigerants on Schrader valves - Product family

WEH® Service Connector TW111 for filling refrigerants on 'Schrader valves'


The WEH® TW111 service connector is the ideal tool for filling refrigerants. Thanks to the easy push & pull actuation, the TW111 connects to Schrader valves in just seconds. The safe and pressure-tight connection is established without continuous screwing and unscrewing of threaded ports. Thus the operator's joints are protected from injuries arising from repetitive motion. Work flows are considerably facilitated and a high operating comfort is achieved.

In addition, the WEH® TW111 filling connector reduces the loss of refrigerant by up to 99%. An integrated and flow-optimized shut-off valve allows only a minimum of refrigerant to escape into the air. Besides environmental protection, the operator is protected from cold burns to the hands.

Connection times are reduced, costs are cut and the productivity is increased.

The TW111 is optionally available with central or 90° media inlet. The colour-coded sliding sleeve, red or blue, for the high pressure respectively low pressure test piece port avoids mistaken use. The service connector is rated for an operating pressure of max. 42 bar and is equipped with a chloroprene front seal as standard. Versions with EPDM front seal for filling the refrigerant R410A are available. Other sealing materials on request. It is the customer’s responsibility to clarify the media compatibility.

TW111 is also available in convenient Pro Sets. These are available either with in-line or 90° media inlets and consist of one connector for the high pressure side, one adapter for the low pressure side, a front seal seat and an O-ring picker.

Max. allowable operating pressure PS
42 bar (610 psi)
Temperature range
-10 °C up to +80 °C
Leak rate
1 x 10-3 mbar x l/s
Actuation
Manual actuation via sliding sleeve
Design
With integrated shut-off valve
Material
Brass and anodized aluminium
Sealing material
Front seal of chloroprene resp. EPDM (R410A)
Marketing Features
99 % less refrigerant loss,Connection in seconds,Different versions available,For connection to Schrader valves,High-grade materials,No frostbitten or burned hands,No hand tightening required,Reduces connection times and costs,WEH® Jaw Locking Mechanism
Alkalmazás

Quick connector for filling and evacuating refrigerants of industrial refrigerating and air conditioning systems with Schrader valve acc. to SAE J513.

Adatlapok
/Files/Files/05-Data-Sheets/Quick-Connectors/tw111-data-sheet-en.pdf
Adatlap EN 281 KB
/Files/Files/05-Data-Sheets/Quick-Connectors/tw111-datenblatt-de.pdf
Adatlap DE 256 KB
 
Küldjön Üzenetet
Adatainak tárolása, hogy a kért tartalmat elérhetővé tegyük. Bármikor módosithatja illetve törölheti személyes adatait. További információkért kérjük olvassa el adatvédelmi irányelveinket.
Vegye fel velünk a kapcsolatot
Telefon
+36 1 453 7063
Email